Inspection of Press Fits on Connector Strips

Height Check with ZFokus from senswork

An automotive supplier manufactures connector strips for autonomous driving. The protrusion of so-called press fits over the board must be measured three-dimensionally. With the ZFokus from senswork we guarantee the quality of the connector strips.

Tasks	Benefits
Inspection of press fits on connector strips	Scanning time: depending on the Z range 1 - 3 s
Determination of the pin height	Accuracy: lateral 5 μm, Z resolution: ≥ 0.01 mm
Max. Setting time: 5 s	Three-dimensional height tests
Max. Test time: 2 s per field of view	High resolution with small fields of view
Accuracy class: ± 0.01 mm
Manufacturing machine
Surface: reflective, structured, oily / greasy, uneven, printed, coated
Condition of parts after measurement: no surface damage
Parts must not be magnetized